Add to caddie Your caddie : 0 product | 0 Fcfa

 
NAVCOM the leader of marine electronics in Africa

IC-M802


img1

IC-M802

HF Marine Transceiver

features

The latest ICOM Digital Signal Processor technology with a compact remote head

Standard 4×8 remote controller

The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller. When set up with the IC-M502 VHF radio, Icom offers you a complete communications station.

Large LCD with dot matrix characters

You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels (plus OFF) adjustable backlit display and keypad.

Easy to use in all conditions

The IC-M802 offers two large dials – bank and channel – for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels are available.

Built-in digital selective calling

For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard.) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation.

Digital signal processor advantage

The speech compressor, utilizing DSP, increases average talk power. Flexible filter settings provide for narrow band signals like e-mail, SITOR, FSK and other operation without an optional filter.

150W (PEP) of powerful output

150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power– very important for data communications, like e-mail.

One-touch e-mail access

An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier.
* Please consult with an HF e-mail provider for details.

Automatic antenna tuner, AT-140

An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD.

Other features

  • Wide band receive coverage (0.5 – 29.9999MHz)
  • Remote control mic allows you to select channels directly
  • Accessory RS-232C port allows connection of modem, etc.
  • GPS input, NMEA 0183 version 3.01
  • A headphone jack in front of the controller

Advanced DSP marine radio with compact remote head

Digital Signal Processor

The digital IF filter provides flexible filter settings for narrow bandwidth signals without having to install an optional filter.

Built-in ITU Class E DSC

The IC-M802 conforms to Class E DSC requirements, vital for your safety at sea.

One touch e-mail button*

The e-mail button allows quick access to the pre-programmed e-mail frequency list.

Automatic antenna tuner, AT-140

The optional AT-140 easily connects to the radio without opening the casing. The tuner through function can be used with the AT-140.

Other features

  • 4×8-inch remote controller and 4×4-inch external speaker
  • Large LCD with dot matrix characters
  • Channel and Group dials offer easy channel selection and operation
  • Powerful 150W (PEP) output
  • 0.5 to 29.9999MHz wideband receiver
  • DIN and RS-232C connectors for external equipment
  • NMEA 0183 interface included
  • 1035 ITU, 160 programmable and 160 e-mail channels are available

 

FOLDED DIPOLE ANTENNA

AH-710

AH-710

     

ANTENNA MATCHERS

MN-100

MN-100

MN-100L

MN-100L

   

ANTENNA TUNERS

AT-130

AT-130

AT-140

AT-140

Tested to IP56 rating.
   

SHIELDED CONTROL CABLES

OPC-566

OPC-566

(Use with AT-130)
OPC-1147/N

OPC-1147/N

10m; 32.8ft
(Use with AT-140)
   

HAND MICROPHONE

HM-135

HM-135

     

EXTERNAL SPEAKER

SP-24

SP-24

     

FLUSH MOUNT KIT

MB-75

MB-75

     

REMOTE CONTROLLER

RC-25

RC-25

     

SEPARATION CABLE

OPC-1106

OPC-1106

5m; 16.4ft
     

 




Add to your caddie


Quantity


To add this product to your caddie, you have to be logged. If you have not yet an account, please first register.